SWF Series CE 451 High Speed Case Erectors

BW Integrated Systems’ SWF Series CE 451 Case Erectors are rugged, high-speed machines that fold and seal the bottom flaps of RSC or HSC cases with hot melt adhesive. The standard machine can run up to 30 cases per minute with economical air cylinder operation.  Servo motors can be used for speeds above 30 per minute.  The design of the CE 451 is based on dependable, mechanical simplicity using opposed vacuum opening and positive case transfer.

  • Up to 40 cases per minute for high efficiency (dependent on size and style)
  • Small footprint
  • Erects RSC, HSC, or auto-bottom case styles
  • Rugged, 24/7 construction
  • Simple operator interface
  • PLC controls
  • Polycarbonate interlocked guard package
  • Hot melt glue system
  • Quick changeover
  • Thousands of installations worldwide

Case Size Range

Length - 8” (203.2mm) min. to 20” (508mm) max.

Width - 5” (127mm) min. to 14” (355.6mm) max.

Depth - 5” (127mm) min. to 15” (381mm) max.

Case Types

Regular-Slotted (RSC), Full Overlap (FOL), Half-Slotted (HSC), Self-Locking

Sealing Type

Hot melt adhesive

Knocked Down

A Dimension - 13” (33.02cm) min. to 34” (86.4cm) max.

B Dimension - 11” (27.9cm) min. to 24” (61.0cm) max.

S (Depth+Top+Flaps) - 8” (20.3cm) min. to 19” (48.3cm) max.

C (Flaps to be glued) - 3” (7.6cm) min. to 6” (152mm) max.

Electrical Requirements

Input Power – 230-volt AC, 3-phase, 60 hertz

Max. Current Draw - 30 amps (240 VAC)

Control Power - 120-volt control poweris obtained through atransformer supplied withmachine; primary operatorcontrols are 24-voltDC obtained through aninternal supply

Air Requirements

Operating Pressure -80 psi (4.1 bar)

Line Pressure -90 psi (6.2 bar)