Tisma Series ServoPro Knockdown Casepacker

BW Integrated Systems’ TISMA Series ServoPro machines are fully automatic case packaging systems designed to end-load a variety of products into Regular Slotted (RSC Style) or Half-Slotted (HSC Style) cases. In conjunction with a BW Integrated Systems’ loader and infeed system, the ServoPro Casepacker automatically takes a corrugated blank and feeds it into the machine. The case is then erected, positioned for loading and the flaps are closed and sealed for palletizing.

  • Up to 45 cases per minute when using RSC corrugated containers; final speed is dependent on product and product orientation
  • All servo-driven
  • Opposing vacuum cup opening of case blank
  • Full length polycarbonate guard package
  • Allen-Bradley PanelView HMI
  • Nordson hot melt glue system / tape optional
  • Allen-Bradley Logix Series PLC
  • PIAB vacuum generator system
  • Full perimeter guard package

Case Size Range

Length: 8” (203.2mm) minimum to 15” (381mm) maximum

Height: 4” (101.6mm) minimum to 12” (304.8mm) maximum

Depth: 8” (203.2mm) minimum to 20” (508mm) maximum

Electrical Requirements

Incoming Voltage - 240/480 volts, 3-phase, 60 Hz

Control Voltage - 24VDC

Hot Melt Circuit – 240-volt, 60 Hz, 1 to 3 phase (optional transformer available if incoming voltage is other than 240)

Current Draw - Dependent on loader

Air Requirements

Operating Pressure - 80 psi (5.4 atm)

Line Pressure - 90 psi (6.1 atm)

Maximum Free Air Consumption - 1.24 cu ft. per cycle

Hot Melt Air Pressure - 20 to 60 psi

  • Pressure sensitive tape closing
  • Low level case detection
  • Open flap detection
  • Beacon lights to indicate case packer operation
  • Length of magazine (up to 8’ long)
  • High and low surge controls
  • Digital indicators and calibrated scales
  • 380-volt electrical power